|
Philip
J. Orban Builders Developers January
28, 2002
Mr.
Stephen Henits Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Dear
Steve: I
have just walked thru lot 52.03 in our North Brunswick
custom home development, that you sheet-rocked and spackled
in November 2001. I
have to commend you on a job well done! Your new technique
utilizing the ButtTaper is fabulous. It has eliminated the
normal bulges at the Butt-Joints that have always been a
headache to me and my staff. We no longer have to worry
about the waviness that have made installation of custom
crowns moldings, chair-rails, and base moldings so
difficult! Sincerely, Philip
J. Orban Click
here to view a copy of this letter.
Parish
Community of St. Mark the Evangelist January
23, 2002
Mr.
Stephen Henits Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Attn:
Steve Dear
Steve: I
am writing to thank you for the excellent work performed by
you and your company in the installation of drywall
throughout our new church facility. You truly were a
pleasure to work with and completed your work in competent
and professional manner. We are especially impressed with
the performance of your new tool, the "ButtTaper."
Many members of our building committee have professional construction
experience and were particularly concerned about the quality
of the finished sheetrock walls in the new church. The
ButtTaper lived up to your promises and delivered a high
quality finish that enhances the appearance of our Worship
Space. We wish you great success in bringing this tool to
the market. It certainly made a remarkable difference on our
project. On
behalf of Father Allen Stepien, the St. Mark's Building Committee,
and the families of St. Mark's Parish, I extend our gratitude
for a job well done! Sincerely, Denis
J. Stypulkoski Co-chairman,
Building Committee Click
here to view a copy of this letter.
Holt
Construction December
20, 2001
Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Attn:
Steve Dear
Gentlemen: You
asked that I might send a testimonial about my experience
with the "Butt Taper". As
president of Holt Construction I have been in the
construction industry for over 30 years and perform in
excess of $100,000,000 per year in construction management
at risk, construction management not at risk, design build
and traditional general lump sum construction. We
are very familiar with the "Butt Taper" and more
specifically, I even had Ford's Drywall use the Butt Taper
on my own house with 18-1/2' ceilings. Obviously, the
concern was whether the butt joints on the ceiling would
either crack or show seams. Following the installation, I
have no cracks and there is no "shadowing" at any
joints in the ceiling. When one stands on the balcony and
you are looking across the ceiling, which traditionally
reveals all sins. The Butt Taper has eliminated such flaws. I
am certain the Butt Taper can be the means and methods for
the drywall industry in the future. We will continue to use
the Butt Taper installation on our work and believe this
innovative new tool is the future in drywall. Very
Truly Yours, Terry
Allerton President Holt
Construction Click
here to view a copy of this letter. Kirchhoff
Construction Management, Inc. December
3, 2001
Mr.
Stephen Henits Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Attn:
Steve Dear
Stephen: I
am writing to complement you on the work you have recently
completed for Kirchhoff Construction Management Inc. I am
very impressed with the speed and quality of your work given
the time line of which you worked under this project. I am
also very impressed with the quality of the butt joints that
were completed with the use of The Butt Taper, the flatness
of the joint really excels given the amount of the light
that comes through the windows the joints are all but
undetectable. I look forward to our next project together. I
will be in contact soon. Sincerely, Richard
K. Burns Project
Manager Kirchhoff
Construction Management, Inc. Click
here to view a copy of this letter. Bilt
Rite Contractors November
27, 2001
Mr. Stephen Henits Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Attn:
Steve Re:
Butt Taper Dear
Steve:
I writing to you as a testimonial for your new method of
doing butt joints. Your Butt Taper did indeed accomplish
what you indicated it would do, even on the semi-gloss paint
on the lobby ceilings, we cannot see the butt joints.
We as well as the owner of the hotel, that you drywalled for
us, are pleased with the outcome, our wall and ceilings have
never been this flat. Congratulations-
It does work. Sincerely, Andy
Tronco
Click
here to view a copy of this letter.
Dubrow
Management Corp November
26, 2001
Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Attn:
Steve Dear
Steve, I
want to show my appreciation for the drywall work that you
did for us over a year ago, especially in the manner in
which you spackled the butt joints. As you know these eleven
foot high walls in the renovation of the three office floors
contained many long walls and to our surprise, the butt
joints do not show any shadowing. When
you first explained your Butt Taper tool, I was skeptical,
but a year passed and the tool has shown it's capability in
creating flat butt joints. Much
success with your invention! Best
Regards, Michael
Shalyt Project
Manager
Click
here to view a copy of this letter.
J
& J Enterprises August
6, 2002
Mr.
Stephen Henits Fords
Drywall, Inc. 153
Howell Avenue Fords,
New Jersey Dear
Steve, After
receiving the Butt Taper Kit, I watched the video with some skepticism
and did not believe this was actually going to work.
But let me tell you, it does work and the butt joints are
not only flat but a real breeze to do. The video makes
it seem like you really have to push on the roller to make
the joint ready for bedding. When in actuality it is
fairly simple and doesn't take hardly any pressure at
all. The only thing that I did not do was to use new
OSB board, we had some twenty year old plywood that we put
to use. I followed your procedures and as much to my surprise,
the ButtTaper does exactly what is supposed to do. I
now have butt joints that are conservatively six to eleven
inches wide and perfectly flat. In the remodeling
business I run across many odd and unusual walls with rock
from 3/8" to 3/4". and I know I will always have a
use for your tool. Steve I really want to say that words
cannot express the way I feel about you ButtTaper and the
way it works. This tool of yours will make any
rocker's or taper's job a heck of alot easier and will
produce an abundance of quality joints. I want to take
this opportunity to thank you for coming up with such a
fantastic tool that will save me many hours of labor and
many, many dollars in the days to come. Very
truly yours, Joe
Cortese Owner/Partner Click
here to view a copy of this letter.
Torgenson
Construction July
13, 2002
Steve,
Thanks
for the info on the NAHB test. It all looks
good. I really enjoy the butttaper. The
first job we tried it on was amazing. The butts
turned out beautiful and I have been topping with an
8" coater. The wafer-board between the
studs is a great innovation. Good tool.
Thanks. Don
Torgerson
JH
CUSTOM TRADES August
20, 2002
Mr.
Stephen Henits Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863 Dear
Henits, I'm
writing to you as a testimonial for the ButtTaper system.
Your system has worked excellent for my company and I am
very impressed with the flatness and quality of the butt
joints that were finished with the ButtTaper. The ButtTaper
has eliminated shadowing and worrying about whether the butt
joint in a project are going to be hidden. I am very
impressed with your product and commend you on your new technique.
I am truly convinced there's no better way to finish butt
joints. I definitely would recommend this product. Sincerely, James
C. Hough JH
Custom Trades Click
here to view a copy of this letter.
ERVIN BOLT CONSTRUCTION
December 16, 2002
Fords
Drywall, Inc. 153
Howell Avenue Fords,
NJ 08863
Attn.:Mr.
Stephen Henits Dear
Mr. Henits,
I just wanted to follow up with some feedback to you
regarding our experience with your ButtTaper System. We are
very pleased with the results both in labor savings and
especially in the quality results of butt joints, reducing
the amount of mud required and eliminating the large hump
that has been difficult to blend in. It works very well with
our work in remodeling projects where we have to blend into
cut wedges both for room addition situations with level
ceilings as well as repairs. We also use it on installation
of the sheet rock larger new jobs using the OSB backer and
eliminating the requirement of locating the joint on the
edges of either joists or studs. We have bought the systems
for each one of our crews so each one of them have them in
the truck as we do much of our own work, especially on the
smaller remodeling jobs and will do our best to get our
subcontractors to use the system because of the desirable
flat finish and time savings.
Again, we are very pleased
with the results we have received using your system and
would recommend it to anyone especially for anyone looking
for top quality results. Sincerely,
Ervin Bolt, Jr.
President
Click
here to view a copy of this letter. |
